Microsoft Surface Hub 2 SmCamera - Manual (Page 444)

Figure 4. Unimpeded removal of compute cartridge
Surface Hub 2S 50" uses a 350 mm x 350 mm mounting framework that meets most —
but not all — of the criteria listed in the VESA Flat Display Mounting Interface Standard.
You can install Surface Hub 2S 50" using any of various off-the-shelf display brackets
designed to accommodate displays that diverge from exact VESA specifications, as
shown below.
On the back of Surface Hub 2S 50", you’ll find a square pattern of four M6 x 1.0
threaded holes centered on the circular bump (565 mm in diameter). Attach your mount
using four M6 x 1.0–12 mm-long metric bolts. Or, depending on preference, you can use
longer bolts up to a maximum of 20 mm. Important considerations for mounting
systems
Item Description Notes
Strength Only choose mounts that can safely support devices of at least 28
kg (62 lbs.). Required
Stiffness Avoid flexible display mounts that can diminish the interactive pen
and touch use experience. Most TV mounts are not designed to
support touch displays. Recommended
Depth Keep the device mounted tightly to the wall especially in corridors
and along circulation paths within rooms. Recommended
Versatility Ensure your mounting solution remains hidden from view in both
the existing landscape mode and any potential portrait mode
(subject to future availability). Recommended
Selecting a mounting system