Microsoft Surface Hub 2 SmCamera - Manual (Page 429)

1. Remove and recycle outer cover.
2. Cut four (4) plastic straps.
3. Open and remove the six (6) clips from the ends.
4. Remove lid and then lift and remove front and back panels.
1. Remove black corner foam pieces (4).
2. Remove black center foam support.
2. Remove black outer packaging foam
Ｕ Caution
Do not remove any white foam, strapping or packaging materials until the Hub 2S
is adjacent to the cart or wall mount on which it will be placed. Additional strapping
materials are provided in the small box located under the hand screw knobs on the