Microsoft Surface Hub 2 SmCamera - Manual (Page 423)

Surface Hub 2S quick start
Article • 01/03/2023
1. Use the handles on each side of the box to move it to the space where you'll set it
up.
2. Before opening, remove the clips (4) on the front and back, and then lift the top off
the box using the handles.
3. In the base of the Surface Hub 2S, open the accessories box containing the setup
guide, Surface Hub 2 pen, Surface Hub 2 camera, and the power cable.
4. On the back of the Surface Hub, there's an instructional label showing you where
to attach the mounting hardware. Install them in place and remove the label.
See this video for more information about unboxing and set up .
1. Attach Surface Hub 2 pen magnetically to your preferred side of the device.
2. To adjust pen pressure, open the Surface app on Surface Hub 2S, select Pen, and
adjust the slider.
Unpack Surface Hub 2S
Install and adjust pen