Microsoft Surface Hub 2 SmCamera - Manual (Page 428)

Install and mount Surface Hub 2S 85”
Article • 01/03/2023
This article explains how to physically install Microsoft Surface Hub 2S 85" in commercial
environments.
Before you begin, please review Microsoft Surface Hub 2S 85" Unboxing and Set Up
video:
Unboxing video
https://www.microsoft.com/en-us/videoplayer/embed/RWwwgL?postJsllMsg=true
Follow all safety precautions
２ Warning
Handling and site prep
The device is very heavy. To reduce the risk of personal injury, death, or
damage to the device due to its size and weight, it is important to keep the
device upright.
Before moving the device to the place where it will be installed, survey the site
to determine how to safely move it to the location where it will be unpacked
and mounted.
Always use at least two people for unpacking and installation.
Once the device is unpacked, it should be mounted immediately, so the
mounting system should be in place before unpacking. If you’re mounting
onto a rolling stand, lock or block the wheels of the stand before unpacking.
To avoid tripping hazards, keep the assembly area clear of packing materials.
） Important
Before proceeding, review the additional safety information listed in Appendix A
below.
1. Remove outer packaging materials