Yaskawa AC Drive Z1000 Bypass Technical Manual - Manual (Page 213)

Setting 1: Enabled
Behavior defined by Z3-05.
n Z3-12: Network Digital Input Select
Determines whether the serial communication digital input simulation is active.
Note: Parameter available in bypass controller software versions VST800298 and later.
No. Name Setting Range Default
Z3-12 Network Digital Input Select 0, 1 0
Setting 0: Disable
Serial communications physical digital inputs are ignored.
For MEMOBUS/Modbus (Z3-01 = 0): Command Register 8402H is disabled.
For Metasys N2 (Z3-01 = 1): Binary Outputs B05, B06, B07, B08, and B09 are disabled.
For P1 Apogee (Z3-01 = 2): Points LDO44, LDO45, LDO46, LDO47, and LDO48 are disabled.
For BACnet (Z3-01 = 3): BV72, BV73, BV74, BV75, BV76, BV77, BV78, and BV79 are disabled.
Setting 1: Enable
Physical digital inputs S1 to S8 are logically OR’d with the serial communications digital inputs.
WARNING! Sudden Movement Hazard. Setting this parameter to 1 may cause the system to run unexpectedly or not stop when required
even if the physical digital input is de-energized, resulting in death or serious injury. Clear all personnel from the drive, motor and machine
area before applying power. Set this parameter to 0 to prevent serial communications from triggering undesired and unexpected system
operation.
u Z4: Ethernet Option Bypass Control
n Z4-01 to Z4-04: IP Address 1 to 4
Sets the network static IP address. Z4-01 is the most significant octet of the network static IP address; Z4-04 is the least
significant.
No. Parameter Name Setting Range Default
Z4-01 IP Address 1
0 to 255
192
Z4-02 IP Address 2 168
Z4-03 IP Address 3 1
Z4-04 IP Address 4 20
n Z4-05 to Z4-08: Subnet Mask 1 to 4
Sets the network static subnet mask. Z4-05 is the most significant octet of the network static subnet mask; Z4-08 is the least
significant.
No. Parameter Name Setting Range Default
Z4-05 Subnet Mask 1
0 to 255
255
Z4-06 Subnet Mask 2 255
Z4-07 Subnet Mask 3 255
Z4-08 Subnet Mask 4 0
n Z4-09 to Z4-12: Gateway Address 1 to 4
Sets the network gateway address. Z4-09 is the most significant octet of the network gateway address; Z4-12 is the least
significant.
No. Parameter Name Setting Range Default
Z4-09 Gateway Address 1
0 to 255
192
Z4-10 Gateway Address 2 168
Z4-11 Gateway Address 3 1
Z4-12 Gateway Address 4 1
5.15 Z: Bypass Parameters
YASKAWA ELECTRIC SIEP YAIZ1B 01D YASKAWA AC Drive – Z1000 Bypass Technical Manual 213
5
Programming