Yaskawa AC Drive Z1000 Bypass Technical Manual - Manual (Page 278)

A
B
A – Protective tube B – Fan connector
Figure 7.15 Remove the Fan Connector: 2A0075 to 2A0114, 4A0052ooA, and 4A0065 to 4A0096
4.
Pull back on the two fan hooks on the right side of the cooling fan unit, then lift the right-side fan diagonally to remove
it from the drive. Repeat the process for the left-side cooling fan unit.
Hook
Figure 7.16 Remove the Right-Side Cooling Fan: 2A0075 to 2A0114, 4A0052ooA, and 4A0065 to 4A0096
n Installing the Cooling Fan: 2A0075 to 2A0114, 4A0052ooA, and 4A0065 to 4A0096
1.
Insert the left-side cooling fan diagonally into the fan finger guard so that the bosses and holes match. It should click
into place.
7.5 Drive Cooling Fans
278 YASKAWA ELECTRIC SIEP YAIZ1B 01D YASKAWA AC Drive – Z1000 Bypass Technical Manual