Yaskawa AC Drive Z1000 Bypass Technical Manual - Manual (Page 76)

Drives Mounted on Z1000 Bypass Models Z1B1D074 to D114 and B052 to B096
1.
Loosen the front cover screws using a #2 Phillips screwdriver. Screw sizes vary by drive model.
A
A –Front cover screw locations
Figure 3.27 Remove the Front Cover (Models Z1B1D074 to D114 and B052 to B096)
2.
Pinch the tabs located on the bottom of the front cover and gently pull forward to remove the front cover.
3.5 Control Circuit Wiring
76 YASKAWA ELECTRIC SIEP YAIZ1B 01D YASKAWA AC Drive – Z1000 Bypass Technical Manual