Yaskawa AC Drive Z1000 Bypass Technical Manual - Manual (Page 280)

A
A –Alignment notches should fit into the corresponding protrusions.
Figure 7.20 Check the Placement of the Fan Finger Guard: 2A0075 to 2A0114, 4A0052ooA, and 4A0065 to 4A0096
5.
Plug the fan connector, then slide the protective cover over the connector.
Figure 7.21 Plug the Fan Connector: 2A0075 to 2A0114, 4A0052ooA, and 4A0065 to 4A0096
6.
Push the fan connector and protective tube into the fan finger guard.
Figure 7.22 Placement of Fan Connector and Protective Tube: 2A0075 to 2A0114, 4A0052ooA, and 4A0065 to 4A0096
7.
While pressing in on the hooks on the left and right sides of the fan finger guard, guide the fan finger guard until it
clicks into place.
7.5 Drive Cooling Fans
280 YASKAWA ELECTRIC SIEP YAIZ1B 01D YASKAWA AC Drive – Z1000 Bypass Technical Manual