Metrohm tiamo 2.3 (process analysis) - Manual (Page 1004)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
988 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
not defined
In this case, the device name must be assigned by the user at the start
of the method.
Device type
Display or selection of the device type. If a device is selected under Device
name, then this Device type field can no longer be edited, and the
device type belonging to the selected device is displayed instead
If the option not defined is selected as Device name, any device types
or device groups which are able to execute the command can be selected,
independently of the devices in the device table.
Selection Device types | Titrando
Default value Titrando
Sensor
Measuring input
Selection of the measuring input the sensor is connected to.
Titrando, 867
Selection
1 | 2
Default value 1
851, 855
Selection
1
Default value 1
Titrino
Selection
1 | 2 | diff.
Default value 1
Sensor
Selection of a sensor of type Temperature sensor or pH Electrode
from the sensors configured in the sensor table.
Selection Sensor name | Temperature sensor | pH Elec-
trode
Default value Temperature sensor
Stirrer
Stirrer
Selection of the stirrer.