Metrohm tiamo 2.3 (process analysis) - Manual (Page 1628)

7.20 IO controller ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1612 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
7.20.6.1 Properties Analog input
Dialogfenster Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'De-
vice type' - 'Device name' ▶ Analog inputs ▶ [Edit] ▶ Properties analog input
In the dialog window Properties Analog input the properties for the
individual analog inputs are set.
Port
Display of the internal designation for an analog input port of the type
AnIn_x_y_z, where x stands for the controller; y for the analog input ter-
minal and z for the input on this terminal.
Port description
Freely selectable designation for an analog input port. This designation is
used in the program to actuate the port.
Input 50 characters
Default value AnIn_x_y_z
The following characters must not be part of the
port description: \ , ', ., {, }, [, ].
Port specification
Shows the specifications of the port.
Type
Display of the port type.
Low level (0%)
Display of the lowest analog input value.
This value is read out automatically and depends on the Type.
High level (100%)
Display of the highest analog input value.
This value is read out automatically and depends on the Type.
Unit
Display of the unit of the analog input value.
This value is read out automatically and depends on the Type.