10 subwindow global variables, 1 configuration - global variables, 10 subwindow global variables 6 6.10.1 – Metrohm tiamo 2.3 (process analysis) User Manual
Page 1472: Configuration - global variables 6
6.10 Subwindow Global variables
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1456
￭￭￭￭￭￭￭￭
tiamo 2.3 (for Process Analysis)
Warning limits for common variable
on | off (Default value: off)
If this option is switched on then the values of the common variables will
be shown in orange if these limits are exceeded.
Lower limit
Lower warning limit for common variable.
Range
-1.0E+99 ... 1.0E+99 (max. 10 digits)
Upper limit
Upper warning limit for common variable.
Range
-1.0E+99 ... 1.0E+99 (max. 10 digits)
Intervention limits for common variable
on | off (Default value: off)
If this option is switched on then the values of the common variables will
be shown in red if these limits are exceeded.
Lower limit
Lower warning limit for common variable.
Range
-1.0E+99 ... 1.0E+99 (max. 10 digits)
Upper limit
Upper warning limit for common variable.
Range
-1.0E+99 ... 1.0E+99 (max. 10 digits)
6.10
Subwindow Global variables
6.10.1
Configuration - Global variables
Subwindow: Configuration
▶ Global variables
Subwindow Global variables
The subwindow Global variables contains the table with the configured
global variables. It can be shown in the program part Configuration as a
part of the Configuration view or (if not present on the desktop) in a sepa-
rate window with View
▶ Quick access. The subwindow can be
enlarged and reduced as required; it can also be maximized.
Using global variables
Global variables are method-embracing variables that are stored overall
clients and can be used in formulas under the designation 'GV.Name'.