Metrohm tiamo 2.3 (process analysis) - Manual (Page 929)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.3 (for Process Analysis) ￭￭￭￭￭￭￭￭ 913
Designa-
tion Description
EP{x}.TIM Time for the endpoint x (1...9) in s
EP{x}.VOL Volume for the endpoint × (1…9) in mL
EVT End volume (total dosed volume at the end of
the command) in mL
FIN Command status; 1 = Command has ended
at least once, 0, invalid (variable not available)
= Command has never ended
FP{x}.ERC 2. derivative for the fixed endpoint x (1...9)
FP{x}.MEA Measured value for the fixed endpoint × (1…9)
in the unit of the measured value
LP{x}.TIM Time for the fixed endpoint x (1...9) in s
FP{x}.VOL Volume for the fixed endpoint × (1…9) in mL
IME Initial measured value (measured value before
start conditions are processed) in the unit of the
measured value
LP.CAx Calculated value × (1...3) for the last measuring
point on the measuring point list
LP.ERC 2. derivative (1...3) for the last measuring point
of the measuring point list
LP.EXx External value × (1...3) for the last measuring
point of the measuring point list
LP.MEA Measured value for the last measuring point of
the measuring point list in the unit of the meas-
ured value
LP.TIM Time for the last measuring point of the measur-
ing point list in s
LP.VOL Volume for the last measuring point in the meas-
uring point list in mL
MA.MEA Maximum measured value in the unit of the
measured value
MA.TIM Time at maximum measured value in s
MA.VOL Volume at maximum measured value in mL
MI.MEA Minimum measured value in the unit of the
measured value