Metrohm tiamo 2.3 (process analysis) - Manual (Page 1351)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.3 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1335
Selection on | off
Default value off
FDA default: on (editable)
Range 1 ... 60 min
Default value 10 min
FDA default: 10 min (editable)
Remove password after signature
If this check box is activated then the password must be entered again
after each signature.
Selection on | off
Default value off
FDA default: on (can no longer be edited)
Sign each determination separately
If this check box is activated then each determination selected in the
determination overview must be signed individually.
Selection on | off
Default value off
FDA default: on (can no longer be edited)
6.2.2.6 Default reasons
Tab: Configuration ▶ Tools ▶ Security settings ▶ Default reasons
On the tab Default reasons, the reasons are defined which must be
entered when signing methods and determinations or when changing
methods, determinations and sample data.
Category
Selection of the category for which the reasons are to be defined.
Selection Signature level 1 | Signature level 2 | Modifi-
cation of methods | Modification of determi-
nations | Modification of sample data
Default value Signature level 1
Reasons
Display of the reasons defined for the selected category.
Input 50 characters
Move text upward (modifies sequence).
Move text downward (modifies sequence).