Metrohm tiamo 2.3 (process analysis) - Manual (Page 1742)

9.4 Databases ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1726 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
Note
A maximum of 4 databases can be opened, but only 2 can be dis-
played at the same time. Databases that are open at the time the
program is ended will be automatically opened the next time the
program is started.
5 Select desired determinations.
6 Click on menu item File ▶ Print ▶ Determination overview….
The dialog window Print determination overview (PDF) opens.
7 Under Selection, select desired determinations.
8 Under Orientation, select the option Portrait format or Land-
scape format.
9 Click on [OK].
The determination overview is opened as PDF file.
9.4 Databases
9.4.1 Database in general
In tiamo, determination databases that in contrast to the configura-
tion database can be generated by the user and contain the determina-
tion data are referred to as databases. Included among such determina-
tion data is the method data used for the determination, the measuring
data generated during the determination and the results calculated from
it.
In local server systems (tiamo light, tiamo full) the databases are stored
on the drives administered by the computer and are only available to
those users registered on that computer who have the appropriate access
rights. In client/server systems (tiamo multi) the databases are stored on
drives administered centrally by the server and are available globally
throughout the entire Client/Server system, i.e. all users with the appropri-
ate access rights can use these databases.