Metrohm tiamo 2.3 (process analysis) - Manual (Page 203)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Workplace
tiamo 2.3 (for Process Analysis) ￭￭￭￭￭￭￭￭ 187
DOS
Selection
off | Measured value | Volume | Temperature |
Time | dV/dt | Calculated 1…3 | External 1…3
Default value off
TET
Selection
off | Volume | Measured value | dT/dV | ERC |
Time | Calculated 1…3 | External 1…3
Default value off
Color
Selection of the curve color for the quantity to be shown on the y2 axis.
Selection Color selection | magenta
Default value magenta
Display measuring points
on | off (Default value: off)
If this option is activated, then in addition to the curve the single meas-
ured values are shown as crosses.
Note
With curves, for which the distance between two measuring points is
smaller than 5 pixels, the individual measuring points are not displayed
anymore, even if a symbol has been selected. In this case, the graphics
window can eventually be enlarged in order to display the symbols
again.
Display grid
on | off (Default value: off)
If this option is activated, a grid will be displayed.
Background
Selection of the color for the curve background.
Selection Color selection | white
Default value white