Metrohm tiamo 2.3 (process analysis) - Manual (Page 1677)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 8 Manual control
tiamo 2.3 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1661
Dosing Interface: 846
Coulometer: 756, 831
pH/Ion - Meter: 867
Sample Processor: 730, 774, 778, 789, 814, 815, 864, 874
Robotic Titrosampler: 855
Spectrometer: Avantes
Input signal
Will not be displayed for the Avantes Spectrometer
Current status
Displays the current status of the 8 input lines.
Templates/Input
If the current status corresponds to one of the defined templates for the
inputs, the corresponding name is shown here.
Note
Only templates without asterisks * are recognized.
Output signal
Current status
Displays the current status of the 14 output lines.
Templates/Input
Input of the binary pattern for the output signal or selecting a predefined
signal pattern.
It is possible to enter the following characters:
0 = line inactive
1 = line active
* = any line status
p = set pulse (pulse length = 200 ms. If a pulse of another length should
be put out, a corresponding template has to be defined.)
Titrando, 831, 846, 855, 856, 867, 751, 756, 758, 784, 785, 795, 798,
799, sample changer
Selection
Bit-pattern with exactly 14 characters (0, 1, *,
p) | ************** | Signal pattern
Default value **************