Metrohm tiamo 2.3 (process analysis) - Manual (Page 1483)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.3 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1467
User
Short name of the user who was logged in during value assignment or
who entered the value manually.
Measuring input
Type and serial number of the measuring input the conductivity sensor
was connected to.
Determination ID
Unambiguous identification for the determination with which the determi-
nation of the TC data was carried out.
The determination ID can be copied and pasted into another field.
Comment
Comment which can be entered by the user.
With menu item [Edit] ▶ Column display... further columns from the
solution properties can be shown.
Note
Lines that contain red entries will also show the line number with a red
background.
Table view
The table cannot be edited directly. With a click on the column title the
table can be sorted according to the selected column in either increasing
or decreasing sequence. The table view can be adapted with the left-hand
mouse button as follows:
￭ Drag the margin between column titles:
Sets the column width
￭ Double-click on the margin between column titles:
Sets the optimal column width
￭ Drag the column title:
Moves the column to the required location
If the contents of a field is larger than the column width, then the whole
contents will be shown as a tooltip if the mouse cursor is kept on the
field.
Functions
The menu [Edit] beneath the table contains the following menu items:
New… Add manually a new line (see Chapter 6.11.2.2, page 1468).