10 rls dev, 1 rls dev - overview, Rls dev – Metrohm tiamo 2.3 (process analysis) User Manual
Page 1246
5.6 Commands
■■■■■■■■■■■■■■■■■■■■■■
1230
■■■■■■■■
tiamo 2.3 (for Process Analysis)
Range
0.001 ... 9.999
Default value
1.000
Gas flow
Inlet
Selection of the inlet of the carrier gas
Selection
Pump | Valve
Default value
Pump
Pump
Use of ambient air as carrier gas.
Valve
Use of gas out of a compressed gas cylinder.
Flow rate
874
Range
10 ... 150 mL/min
Default value
50 mL/min
Gas flow
Selection
Switch on | Switch off
Default value
Switch on
Switch on
Switches on the gas flow.
Switch off
Switches off the gas flow.
5.6.7.10
RLS DEV
5.6.7.10.1
RLS DEV - Overview
Dialog window: Method
▶ RLS DEV ▶ Properties... ▶ RLS DEV - 'Device name'
Command to release a device for using it in other parallel running meth-
ods. It removes the reservation made by the current method.
Devices
This command can be executed with the following devices:
Sample Processor: 730, 774, 778, 789, 814, 815, 864, 874
Robotic Titrosampler: 855
Appearance
The command has the following appearance: