Metrohm tiamo 2.3 (process analysis) - Manual (Page 458)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
442 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
Identification Description
.VAL Result value (optional, i.e. 'MV.Factor'
=MV.Factor.VAL') (Text, Number or
Date/Time)
.OVF Exceeding limits for method variable
(Number: 1 = limit exceeded, 0 =
limit not exceeded)
In the following lines you will find the method variables (sample data)
present in the default settings which appear in the Run subwindow
and which can be edited and deleted in the START command of the
corresponding method.
Sample size.VAL Value of 'Sample size' (Number)
Sample size.OVF Exceeding limit for 'sample size' (Num-
ber)
Unit.VAL Value of 'Unit'. (Text)
Unit.OVF Exceeding limit for 'unit' (Number)
Sample position.VAL Value of 'Sample position' (Number)
Sample position.OVF Exceeding limit for 'sample position'
(Number)
ID1 (…3).VAL Value of 'ID1…3' (Text)
ID1 (…3).OVF Exceeding limit for 'ID…3' (Number)
5.6.2.2.2 START - General
Tab: Method ▶ START ▶ Properties... ▶ START 'Command name' ▶ General
Command name
Name of the command.
Input 25 characters
Workplace view
Workplace view
Selection Current view | View
Default value Current view
Current view
If this option is enabled, the current view of the workplace remains
opened when starting a determination.