Metrohm tiamo 2.3 (process analysis) - Manual (Page 1700)

8.4 Manual control - Functions ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1684 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
8.4.6.4 Analog inputs
8.4.6.4.1 Analog inputs - Overview
Program part: Manual control
If in the device tree the branch Analog inputs is selected, then the adja-
cent value for all connected analog inputs is shown in their physical order
in the subwindow for the graphical display.
Graphical display
Example:
8.4.6.4.2 Analog input
Program part: Manual control
If in the device tree a single analog input is selected, then the properties
of the input are displayed in the subwindow for functions/parameters.
In the subwindow for the graphical display, the adjacent value of the
input is displayed.
Analog input
Port description
Display of the port description.
Port
Display of the internal description of the port.
Type
Display of the port type.
Mapping
Display of the mapped value range.
Current value
Display of the adjacent value.