7 rack, 1 rack - overview, Rack – Metrohm tiamo 2.3 (process analysis) User Manual
Page 1238
5.6 Commands
■■■■■■■■■■■■■■■■■■■■■■
1222
■■■■■■■■
tiamo 2.3 (for Process Analysis)
730, 778, 789
Range
0 ... 15
Default value
8
Action
Selection
Switch on | Switch off | Period of operation
Default value
Switch on
Switch on
Switch on the stirrer. The stirrer keeps switched on after the command
has finished.
Switch off
Switch off the stirrer.
Period of operation
The stirrer can be switched on for a particular period.
Range
0 ... 9999.9
Default value
10.0
Selection
s | min
Default value
s
5.6.7.7
RACK
5.6.7.7.1
RACK - Overview
Dialog window: Method
▶ RACK ▶ Properties... ▶ RACK - 'Command name'
Command for initialization of the attached sample rack. The rack,
lift and robotic arm (if present) are reset, the rack code is read off and the
corresponding rack data is transferred to the Sample Processor.