Metrohm tiamo 2.3 (process analysis) - Manual (Page 1278)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1262 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
Max. waiting time
on | off (Default value: off)
If this option is activated, then a maximum waiting time for event mes-
sages can be entered. If none of the conditions defined above are fulfilled
after this time period, the command is canceled and the next command in
the sequence is executed.
Value
Range 0 ... 9999.9
Default value 0
Unit
Selection min | s
Default value s
Message
This message is displayed in the live window while waiting for the condi-
tion defined above. The text editor for entering or changing the message
is opened with or by double-clicking into the text field.
5.6.9.5.3 RECEIVE - Wait for event/status
Dialog window: Method ▶ RECEIVE ▶ Properties... ▶ [New]/[Properties] ▶ Wait for
event/status
Command
Name of the command whose event message or status is to be waited
for.
Selection Command
Event message
Selection of the event message to be waited for, or of the status to be
waited for. The following event messages and statuses can be selected.
Selection Event message | Start
Default value Start
The following event messages and statuses can be selected:
Event/
Status Type Significance Com-
mands
Start Event The command has just now been
started. All