Metrohm tiamo 2.3 (process analysis) User Manual
Page 350
4.5 Determination overview
■■■■■■■■■■■■■■■■■■■■■■
334
■■■■■■■■
tiamo 2.3 (for Process Analysis)
Background
Background color
Selection of the color for the curve background.
Selection
13 colors | white
Default value
white
Show endpoints
Show endpoints
on | off (Default value: on)
If this check box is activated then the endpoints found will be shown on
the curve by the symbol ♦ and labeled with EP# (potentiometric end-
point), BP# (break point), FP# (fixed endpoint), HP (HNP), MI (minimum
value) or MA (maximum value).
Automatic EPs
Selection of the color for automatically set endpoints.
Selection
13 colors | black
Default value
black
Manual EPs
Selects the color for manually set endpoints.
Selection
13 colors | pink
Default value
pink
Show evaluation lines
Show evaluation lines
on | off (Default value: off)
If this check box is activated the evaluation lines (tangents, auxiliary lines)
will be shown.
Tangents
Selection of the color for the tangents and auxiliary lines.
Selection
13 colors | light green
Default value
light green
Auxiliary lines
Selection of the color for the auxiliary lines.
Selection
13 colors | blue
Default value
blue