20 io controller, 1 io controller - overview, 2 properties - general – Metrohm tiamo 2.3 (process analysis) User Manual

Page 1618: 20 io controller 2 7.20.1, Io controller - overview 2, Properties - general 2, Io controller

Advertising
background image

7.20 IO controller

■■■■■■■■■■■■■■■■■■■■■■

1602

■■■■■■■■

tiamo 2.3 (for Process Analysis)

7.20

IO controller

7.20.1

IO controller - Overview

Dialogfenster: Configuration

Devices [Edit] Properties… Properties - 'De-

vice type' - 'Device name'

The properties of an IO controller are set on the following tabs:

(see Chapter 7.20.2, page 1602)
General device information such as device name, device type, serial
number, etc.

(see Chapter 7.20.3, page 1603)
General settings for the IO controller.

(see Chapter 7.20.4, page 1604)
Digital inputs of the IO controller.

(see Chapter 7.20.5, page 1608)
Digital outputs of the IO controller.

(see Chapter 7.20.6, page 1611)
Analog inputs of the IO controller.

(see Chapter 7.20.7, page 1613)
Analog outputs of the IO controller.

Controller
Controller of the IO Controller.

(see Chapter 6.6.3.8, page 1409)
Information on GLP tests and GLP monitoring.

7.20.2

Properties - General

Tab: Configuration

Devices [Edit] Properties... Properties - 'Device type' -

'Device name'

General

Device name

Name of device (can be freely defined by user).

Input

50 characters

Default value

Device type number_#

Device type

Display or selection of the device type.

Wrapper version

Display of the version of AdsWrapper.dll.

Firmware version

Display of the SPS firmware version on the bus controller. Combined of
the bus controller firmware and the version of the bus controller program.

Advertising