Metrohm tiamo 2.3 (process analysis) - Manual (Page 1248)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1232 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
Device type
Display or selection of the device type. If a device is selected under Device
name, then this Device type field can no longer be edited, and the
device type belonging to the selected device is displayed instead.
If the option not defined is selected as Device name, any device types
or device groups which are able to execute the command can be selected,
independently of the devices in the device table.
Selection 'Sample changer types' | 814 USB Sample Pro-
cessor
Default value 814 USB Sample Processor
5.6.8 Result commands
5.6.8.1 Result commands - Overview
Menu item: Method ▶ Paste ▶ New command... ▶ Results
Commands for the calculation, storage and output of results.
The following four result commands can be selected:
￭ CALC - Overview
Calculation of intermediate and end results, titer values and common
variables.
￭ DATABASE - Overview
Storage of the determination data in data bases.
￭ REPORT - Overview
Output of a report defined by a report template.
￭ EXPORT - Overview
Export of determination data.
5.6.8.2 CALC
5.6.8.2.1 CALC - Overview
Dialog window: Method ▶ CALC ▶ Properties... ▶ CALC - 'Command name'
Command for the calculation of intermediate and end results and
the assignment of titer values and common variables.
Appearance
The command has the following appearance: