Metrohm tiamo 2.3 (process analysis) - Manual (Page 1660)

7.21 Stepping motor controller ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1644 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
Import Import of a text file (TXT, CSV) containing the port description. Each line is inter-
preted as port description, spaces will be ignored.
Export Export a text file containing the port descriptions of all digital inputs.
7.21.5.1 Properties Digital output
Dialogfenster Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'De-
vice type' - 'Device name' ▶ Digital Outputs ▶ [Edit] ▶ Properties digital output
In the dialog window Properties Digital output the properties of the
individual digital outputs are set.
Port
Display of the internal designation for a digital output port of the type
DigOut_x_y_z, where x stands for the controller; y for the digital output
terminal and z for the output on this terminal.
Port description
Freely selectable designation for a digital output port. This designation is
used in the program to actuate the port.
Input 50 characters
Default value DigOut_x_y_z
The following characters must not be part of the
port description: \ , ', ., {, }, [, ].
Port specification
Shows the specifications of the port.
Type
Selection of the port type.
Depending on the type the function and the graphical representation of
the port varies.
Selection not defined | Pump | Stirrer | valve | Gen. out-
put | Alarm signal
Default value not defined
Note
Additionally a stepping motor can have a port of the Type = Brake.
The port information for this port type is automatically read out of the
stepping motor controller.