Metrohm tiamo 2.3 (process analysis) - Manual (Page 893)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.3 (for Process Analysis) ￭￭￭￭￭￭￭￭ 877
Titrando, 855
Range
-20.000 ... 20.000
Default value -20.000
Titrino
Range
-20.00 ... 20.00
Default value -20.00
Lower hysteresis pH
Lower hysteresis of the measured value. If the measured value exceeds the
lower limit by this hysteresis value, then the event Measured value
lower limit ok is triggered.
Titrando, 855
Range
0.000 ... 20.000
Default value 0.020
Upper limit pH
Upper limit of the measured value. If the measured value exceeds this
limit, then the event Measured value upper limit exceeded is trig-
gered.
Titrando, 855
Range
-20.000 ... 20.000
Default value 20.000
Titrino
Range
-20.00 ... 20.00
Default value 20.00
Upper hysteresis pH
The upper hysteresis of the measured value. If the measured value once
again falls below the upper limit by this hysteresis value, then the event
Measured value upper limit ok will be triggered.
Titrando, 855
Range
0.000 ... 20.000
Default value 0.020
Action
Selection of the event to be triggered if the upper or lower limit is excee-
ded: