Metrohm tiamo 2.3 (process analysis) - Manual (Page 272)

4.4 Templates ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
256 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
Display grid
on | off (Default value: off)
If this check box is actjvated then a grid will be shown against the back-
ground.
Grid type
Selection of the type of grid line.
Selection Select line type
Grid color
Selection of the color for the grid lines.
Selection Color selection | gray
Default value gray
Show endpoints
on | off (Default value: off)
If this check box is activated then the endpoints found will be indicated on
the curve by the symbol ♦ and labeled with EP# (potentiometric end-
points), BP# (break point) or FP# (fixed endpoint).
Automatic EPs
Selection of the color for automatically set endpoints.
Selection Color selection | black
Default value black
Manual EPs
Selects the color for manually set endpoints.
Selection Color selection | pink
Default value pink
Background
Background color
Selection of the color for the curve background.
Selection Color selection | white
Default value white
Legend
Display of the data field, which is shown in the legend to identify the
curves.