Metrohm tiamo 2.3 (process analysis) - Manual (Page 1256)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1240 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
Result monitoring
Result monitoring
on | off (Default value: off)
The question of whether the result is within the defined limit values is
monitored while calculating the result during the determination if this
option is enabled.
Lower limit
Lower limit for the result.
Input 10 digits
Upper limit
Upper limit for the result.
Input 10 digits
Message
Message
The message defined here can be put out to different targets if the upper
limit is exceeded or if the lower limit is not reached. The text editor for
entering or changing the message is opened with or by double-click-
ing into the text field (see Chapter 2.5.2, page 90). The formula editor can
also be called up inside the text field (see Chapter 2.4, page 29).
Input Text (unlimited)
Display message
on | off (Default value: on)
If this option is enabled, all active tracks are stopped and the message
defined in the text box will be displayed in the event that the limits are
exceeded. You can select whether you want to continue the stopped
tracks with [Continue] or - if defined - to execute the Action listed
below.
Record message
on | off (Default value: on)
If this option is enabled, the message defined in the text box will be docu-
mented in the determination if the limits are exceeded. The run will not be
stopped.