Metrohm tiamo 2.3 (process analysis) - Manual (Page 1393)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.3 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1377
for fields of type 'Date'
The opens the window Select date to select the date (see Chapter
2.5.1, page 89).
for fields of type 'Date' and 'Operator = Today'
Range
-9999 ... 9999
Default value 0
Match case
on | off (Default value: off)
If this option is activated, then upper/lower case will be differentiated
when filtering fields with Type = Text.
Use asterisk (*) as wildcard
on | off (Default value: off)
If this option is switched on, then the asterisk * is used as a placeholder
for any character sequences when filtering fields for which Type = Text.
6.4.2.3.4.3 Special filter - Saving filter
Dialog window: Audit Trail ▶ Filter ▶ Special filter... ▶ Special filter - Database
'ConfigDB' ▶ [Save filter] ▶ Save filter
The button [Save filter] is used to open the dialog window Save filter
for saving a special filter.
Filter name
Name under which the special filter is to be saved.
Input 50 characters
[Save]
Save the filter under the given name.
Note
The filters are saved globally in the configuration database and are
therefore available for all clients.