Metrohm tiamo 2.3 (process analysis) - Manual (Page 1084)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1068 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
Number of additions
Number of times the standard solution is to be added.
Range 1 ... 19
Default value 3
Volume auxiliary solution
Volume of the auxiliary solution (e.g. buffer) which was added to the sam-
ple before the first standard addition.
Range 0 ... 9999.999 mL
Default value 0 mL
Addition mode
Selection
Fixed volume increments | Variable volume
increments
Default value Fixed volume increments
Fixed volume increments
If this option is enabled a fixed volume increment must be added for
each standard addition.
Variable volume increments
If this option is enabled the defined volume increment must be added
for each standard addition.
Addition volume
Size of the fixed addition volume (only when Addition mode = fixed
volume increments).
Range 0.00000 ... 99999.9 mL
Default value 100 mL
Addition volume 1…19
Size of the individual addition volumes (only when Addition mode = var-
iable volume increments).
Range 0.00000 ... 99999.9 mL
Default value 100 mL
Addition solution
Concentration
Concentration of addition solution.
Range 0.001 ... 999999.999
Default value 1.000