Metrohm tiamo 2.3 (process analysis) - Manual (Page 1709)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 8 Manual control
tiamo 2.3 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1693
Reference
position
Brake
Safety switch 1
Safety switch 2
Safety switch 3
Overview of the states of a stepping motor:
ACTIVE INACTIVE ERROR
Motor on Motor off Display flashes
8.4.6.7 Multi-port valve
Program part: Manual control
If in the device tree a multi-port valve is selected, then the functions and
parameters belonging to this element are displayed in the subwindow for
functions/parameters.
Current port
Shows the current port position.
Port
Selection of the target port to be switched to.