Metrohm tiamo 2.3 (process analysis) - Manual (Page 57)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 2 General program functions
tiamo 2.3 (for Process Analysis) ￭￭￭￭￭￭￭￭ 41
Designation Description Commands
.ETE End temperature (temperature fol-
lowing processing of the com-
mand) in °C DET, MET, SET,
KFT, KFC, BRC,
STAT, MEAS
(without T/Flow,
Ref, Spec), CAL
Cond, CAL MEAS,
STDADD, DOS,
ELT MEAS
.ETR Result of the electrode test.
Electrode quality:
0 = No data available
1 = Short circuit
2 = Excessive start drift
3 = Wrong buffer
4 = Problems with the diaphragm
5 = Reference system defective
6 = No buffer values for the tem-
perature or excessive deviation of
the temperature between buffers
7 = Partial short circuit
8 = Glass defective
9 = Poor electrode
10 = Usable electrode
11 = Good electrode
12 = Excellent electrode
ELT LOOP
.EVT End volume (total dosed volume
at the end of the command) in mL DET, MET, SET,
KFT, STAT, DOS
.FIN Command status; 1 = Command
has ended at least once, 0,
invalid (variable not available) =
Command has never ended All except START
and END
.FP{x}.CNT Intensity for the fixed endpoint x
(1…9) in counts MEAS Opt
.FP{x}.DME Measured value differential for the
fixed endpoint x (1…9) MET