Metrohm tiamo 2.3 (process analysis) - Manual (Page 1372)

6.3 Configuration data ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1356 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
6.3.3.4.3 Edit observational pair
Dialog window: Configuration ▶ Tools ▶ Templates ▶ Conductivity stand-
ards ▶ Conductivity standards ▶ Edit conductivity standard ▶ Edit observational
pair
With [New] or [Edit] in the Edit conductivity standards dialog win-
dow, the dialog window Edit value pair opens for entering a new value
pair or for editing an existing value pair.
Temperature
Temperature at which the conductivity was determined.
Range -20 ... 150 °C
Conductivity
Conductivity for the specified temperature (6 significant places).
Range 0.00000 ... 2000.00 mS/cm
6.3.3.5 Templates - E-mail
6.3.3.5.1 Managing e-mail templates
Dialog window: Configuration ▶ Tools ▶ Templates ▶ E-mail templates... ▶ E-mail
templates
The saved e-mail templates are displayed in a table in the dialog window
E-mail templates. The table cannot be edited, but with a click on the
column title the table can be sorted according to the selected column in
either increasing or decreasing order.
[New]
Create a new template. The Edit e-mail template window opens in
which a new template can be defined (see Chapter 6.3.3.5.2, page
1357).
[Edit]
Edit the selected template. The Edit e-mail template window opens in
which the template can be edited (see Chapter 6.3.3.5.2, page 1357).
[Delete]
Delete the selected template.
[Copy]
Copy the selected template which is saved under the name Copy of %1.