Metrohm tiamo 2.3 (process analysis) - Manual (Page 1752)

9.6 Methods ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1736 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
9.6 Methods
9.6.1 Open method
How to proceed?
1 Select program part Method.
2 Click on the symbol or the menu item File ▶ Open....
The dialog window Open method opens.
3 In the list box Method group select the desired method group.
4 Select the desired method from the table or enter a name in the field
Method name.
5 Click on [Open].
The selected method is opened in the main window in the place of a
method that is already opened. The method name is displayed in the
title bar of the program; the number of currently opened methods is
displayed in the left upper corner of the method symbol.
Note
A maximum of 9 methods can be opened, but only 2 can be dis-
played at the same time.
9.6.2 Closing method
How to proceed?
Close single method
1 Select program part Method.
2 Click on the symbol or the menu item File ▶ Close.
The selected method will be closed. If the method has been modi-
fied, there will be a request to save the method as a new version.