Metrohm tiamo 2.3 (process analysis) - Manual (Page 1250)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1234 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
Designa-
tion Description
.NSR Statistics actual counter for the result
.NST Statistics setpoint counter for the result
.OVF Limit value violation for result; 1 = limit exceeded, 0 =
limit not exceeded
.RSD Relative standard deviation for the result
.STS Statistics status for the result; 1 = Statistics on, 0 =
Statistics off
.UNI Result unit (Text)
.SLO Slope for the linear regression (result vs. sample size)
.ITC Axis intercept for the linear regression (result vs. sample
size)
.COR Correlation coefficient for the linear regression (result vs.
sample size)
5.6.8.2.2 CALC - Calculation overview
Dialog window: Method ▶ CALC ▶ Properties... ▶ CALC 'Command name'
Command name
Name of the command.
Input 25 characters
Moves the selected result upward (changes the sequence).
Moves the selected result downward (changes the sequence).
[New]
Open the dialog window New result in order to select a new template
(see Chapter 5.6.8.2.3, page 1235).
[Properties]
Open the dialog window Result - 'Result name' in order to edit the
properties of the result selected in the table (see Chapter 5.6.8.2.5.1,
page 1238).
[Delete]
Delete the result selected in the table.