Metrohm tiamo 2.3 (process analysis) - Manual (Page 1373)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.3 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1357
6.3.3.5.2 Editing e-mail templates
Dialog window: Configuration ▶ Tools ▶ Templates ▶ E-mail templates... ▶ E-mail
templates ▶ [New] / [Properties] ▶ Edit e-mail template
With [New] or [Edit] in the dialog window E-mail templates, the dialog
window Edit e-mail template opens for entering a new template or for
editing an existing template.
E-mail template
Name of the e-mail template.
Input 1 … 16 characters
Recipient
E-mail address
E-mail address of the recipient.
Input 1 … 200 characters
Sender
E-mail address
E-mail address of the sender.
Input 1 … 200 characters
SMTP server
Address of the SMTP mail server.
Input 1 … 200 characters
Port
Port number of the SMTP mail server.
Range 1 ... 1 … 65536
Default value 25
Authentication
on | off (Default value: off)
Check box for activating the authentication of the sender when sending
the e-mail or selection of the authentication method.
Selection SMTP | SMTP after POP
Default value SMTP
POP server
Address of the POP mail server.