Metrohm tiamo 2.3 (process analysis) - Manual (Page 1402)

6.5 Subwindow Devices ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1386 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
Remove the selected column from the table.
Modify the sequence of the displayed columns by moving the selected
column up.
Modify the sequence of the displayed columns by moving the selected
column down.
6.5.2.5 Editing ignored devices
Dialog window: Configuration ▶ Devices ▶ [Edit] ▶ Ignored devices ▶ Ignored devi-
ces
With [Edit] ▶ Ignored devices, the dialog window Ignored devices is
opened. Here the list of ignored devices can be edited.
Ignored devices are devices which are recognized automatically upon con-
nection but are ones which the user does not wish to have permanently
displayed in the device table. Ignored devices will no longer be recognized
automatically at the time of the next program start.
Table contents
The following information concerning the ignored devices is shown in the
table:
Device type
Type of device.
Device serial number
Serial number of the device.
[Delete]
The highlighted device is removed from the list. It will be recognized auto-
matically again at the time of the next program start and can be included
in the list of devices.
6.5.2.6 Printing the device list
Dialog window: Configuration ▶ Devices ▶ [Edit] ▶ Print (PDF)... ▶ Print list of
devices (PDF)
With [Edit] ▶ Print (PDF)..., the dialog window Print list of devices
(PDF) is opened.