Metrohm tiamo 2.3 (process analysis) - Manual (Page 1691)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 8 Manual control
tiamo 2.3 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1675
Temperature coefficient
Range 0.00 ... 9.99 %/°C
Sample solution
Select the name from the table Sample solution (TC conductivity).
Selection DIN | Table entries
Default value DIN
[Start]
Start measurement.
[Stop]
Stop measurement.
8.4.5.3 Measure - Intensity
Program part: Manual control
Here the intensity of an uncorrected spectrum can be measured and dis-
played.
Start wavelength
Lower limit of the spectrum.
Range 100.0 ... 2000.0 nm
Default value 400.0 nm
End wavelength
Upper limit of the spectrum.
Range 100.0 ... 2000.0 nm
Default value 1000.0 nm
Integration time
Integration time for spectrum recording.
Range 0.01 ... 600000 ms
Default value 6 ms
Averaged spectra
The number of spectra that are recorded and averaged.
Range 1 ... 10000
Default value 10
Smoothing
Number of neighboring pixels with which the value for each measurement
pixel is determined.