Metrohm tiamo 2.3 (process analysis) - Manual (Page 752)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
736 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
[Properties]
Open the dialog window External measured value # in which the
parameters for the external measured value can be edited (see Chapter
5.6.3.11.2, page 929).
[Delete]
Delete the external measured value selected in the table.
5.6.3.4.4.10 SET U - Fixed endpoint evaluation
Dialog window: Method ▶ SET U ▶ Properties... ▶ Additional evaluations ▶ Fixed
endpoint evaluation ▶ [New]/[Properties] ▶ Fixed endpoint evaluation #
Quantity
Selection of the fixed measured quantity to which the associated values
for the other quantities are to be interpolated from the list of measured
points.
Selection Measured value | Time | Volume
Default value Measured value
Fix value
Value of the fix endpoint.
Measured value
Range
-2000.0 ... 2000.0 mV
Time
Range
0.0 ... 999999.9 s
Volume
Range
0.00000 ... 9999.99 mL
5.6.3.4.5 SET Ipol
5.6.3.4.5.1 SET Ipol - Overview
Dialog window: Method ▶ SET Ipol ▶ Properties... ▶ SET Ipol - 'Command name'
Command for Set endpoint titrations with voltametric measurement
(selectable polarization current).
Instruments
This command can be executed with the following devices:
Titrando: 808, 809, 835, 836, 841, 842, 852, 857, 888, 901, 902, 904,
905, 906, 907
Titrino: 702, 716, 718, 719, 720, 721, 736, 751, 758, 785, 794, 798,
799