Metrohm tiamo 2.3 (process analysis) - Manual (Page 275)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 4 Database
tiamo 2.3 (for Process Analysis) ￭￭￭￭￭￭￭￭ 259
File type
Selection of the file format for data export:
Selection *.mdet (tiamo format) | *.csv (comma separa-
ted) | *.slk (SLK format) | *.xml (XML format) |
*.csv (measuring point list)
Default value *.mdet (tiamo format)
*.mdet (tiamo format)
Program-specific data exchange format that can only be imported into
other tiamo databases.
*.csv (comma separated)
Data exchange format with unformatted text that can be imported into
other PC programs (e.g. Excel, Access).
*.slk (SLK format)
Data exchange format with formatted text that can be imported into
other PC programs (e.g. Excel).
*.xml (XML format)
Data exchange format with XML code that can be imported into corre-
sponding PC programs.
*.csv (measuring point list)
Data exchange format for the measuring point list with unformatted
text that can be imported into corresponding PC programs. The text
file contains a document header with date/time of the determination
and the determination ID, then the measuring point lists of the sepa-
rate commands are listed one after the other. The command name is
listed first for each measuring point list, followed by a header with the
designations and the units of the measured values of the command.
This is followed by the list of the measuring points, each measuring
point is listed in a separate line and consists of a time indication and all
measured values generated by the command.
[Select fields]
Opens the dialog window Select fields in which the required fields for
the export can be selected, arranged in the required sequence and
renamed.
Note
Field selection is only possible for the file types *.csv and *.slk. With
*.mdet and *.xml always all fields will be exported.
[Options]
Opens the dialog window Options, in which the separators can be
defined.