Metrohm tiamo 2.3 (process analysis) - Manual (Page 160)

3.6 Subwindow Run ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
144 ￭￭￭￭￭￭￭￭ tiamo 2.3 (for Process Analysis)
Confirmation necessary to accept data during the determination.
on | off (Default value: off)
If this option is switched on, then data will not be imported during a
determination except when the Data input dialog of a REQUEST com-
mand is open.
Import from barcode reader
on | off (Default value: off)
If this option is enabled, then external data from the selected barcode
reader will be imported into the fields on the tab Single determination.
The device properties of the barcode reader will define the field into
which the data is imported (see Chapter 7.19.4, page 1599).
Barcode reader
Selection of the barcode reader from which data is to be imported.
Selection Device name
Selection Always accept data | Accept data only for
active window
Default value Always accept data
Always accept data
If this option is selected, then the data sent from the barcode reader is
imported into all of the Single determination tabs of the open work-
places for which this barcode reader is defined as data source.
Accept data only for active window
If this option is selected, then the data sent from the barcode reader is
imported only into the Single determination tab of the workplace
that is actively selected.
Confirmation necessary to accept data during the determination.
on | off (Default value: off)
If this option is switched on, then data will not be imported during a
determination except when the Data input dialog of a REQUEST com-
mand is open.
3.6.3.10 Modification comment for sample data
Dialog window: Workplace ▶ Run ▶ Single determination ▶ Live
modifications ▶ Live modifications ▶ Modification comments
sample data
Dialog window: Workplace ▶ Sequence ▶ Determination ser-
ies ▶ [Edit] ▶ Edit line ▶ Edit line - Working sample table - Work-
place 'Name' ▶ Modification comment sample data