Dell PowerEdge VRTX - Manual (Page 101)

SubCategory CBL = Cable
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
CBL0003
Message Backplane arg1 connector arg2 disconnected. No cable detected.
Arguments
• arg1 = Bay ID
• arg2 = Connector Name
Detailed
Description None
Recommended
Response Action Check backplane configuration. Re-connect cable. If the issue persists, contact technical
support. Refer to the product documentation to choose a convenient contact method.
Category System Health
SubCategory CBL = Cable
Severity Severity 1 (Critical)
Trap/EventID 2393
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
CBL0004
Message Cable arg1 is incorrectly connected to backplane arg2 connector arg3 .
Arguments
• arg1 = Cable Name
• arg2 = Bay ID
• arg3 = Connector Name
101