Dell PowerEdge VRTX - Manual (Page 61)

ASR0003
Message The watchdog timer power cycled the system.
Detailed
Description The operating system or an application failed to communicate to the baseboard management
controller (BMC). The system powered cycled per the configured setting.
Recommended
Response Action Check the operating system, application, hardware, and system event log for exception events.
Category System Health
SubCategory ASR = Auto Sys Reset
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
ASR0008
Message The watchdog timer interrupt was initiated.
Detailed
Description The operating system or an application failed to communicate to the baseboard management
controller (BMC) within the timeout period. The BMC invoked a system interrupt. (IPMI sensor
type code 23h - offset 00h)
Recommended
Response Action Check the operating system, application, hardware, and system event log for exception events.
Category System Health
SubCategory ASR = Auto Sys Reset
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
61