Dell PowerEdge VRTX - Manual (Page 776)

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC8602
Message Quick Deploy Profile for server arg1 failed: unable to get mutex.
Arguments
• arg1 = server number
Detailed
Description The system is busy with other operations. Please wait and retry the operation.
Recommended
Response Action Retry operation
Category Audit
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC8603
Message Quick Deploy Profile: Server arg1 SCIOR is disabled. Unable to apply profile.
Arguments
• arg1 = server number
Detailed
Description The target server must have CSIOR enabled to apply a settings profile.
Recommended
Response Action Enable CSIOR on the target server
Category Audit
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
776