Dell PowerEdge VRTX - Manual (Page 585)

Detailed
Description The Virtual Reseat initiated on the Sleeve identified in the message successfully turned off the
Sleeve. However, the Sleeve did not turn on successfully. A Virtual Reseat is the same as
removing and inserting a Sleeve.
Recommended
Response Action Retry the Virtual Reseat operation on the Sleeve identified in the message. If the issue persists,
manually remove and reinsert the Sleeve in the chassis.
Category Audit
SubCategory PWR = Power Usage
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
PWR8577
Message A Virtual Reseat operation is initiated on Sleeve arg1 .
Arguments
• arg1 = sleeve number
Detailed
Description A Virtual Reseat operation is initiated on the Sleeve identified in the message. A Virtual Reseat
is the same as removing and inserting a Sleeve.
Recommended
Response Action No response action is required.
Category Audit
SubCategory PWR = Power Usage
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
PWR8578
Message Chassis Management Controller is unable to turn on the iDRAC on server- arg1 because power
required is less than available power.
585