Dell PowerEdge VRTX - Manual (Page 227)

SubCategory ENC = Storage Enclosr
Severity Severity 3 (Informational)
Trap/EventID 4339
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
ENC31
Message Firmware download on arg1 has failed.
Arguments
• arg1 = Enclosure Name
Detailed
Description The system was unable to download firmware to the enclosure. The controller may have lost
communication with the enclosure. There may have been problems with the data transfer or
the download media may be corrupt.
Recommended
Response Action Attempt to download the enclosure firmware again. If problems continue, verify that the
controller can communicate with the enclosure. Make sure that the enclosure is powered ON.
Refer to the storage hardware documentation for information on checking the cables.
Category Storage
SubCategory ENC = Storage Enclosr
Severity Severity 2 (Warning)
Trap/EventID 4338
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
ENC32
Message Storage Enclosure Processor (SEP) for arg1 has been rebooted.
Arguments
• arg1 = Enclosure Name
Detailed
Description The SEP has been rebooted as part of the firmware download operation and will be unavailable
until the operation completes.
227