Dell PowerEdge VRTX - Manual (Page 551)

SubCategory PWR = Power Usage
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
PWR8505
Message The Dynamic Power Supply Engagement feature was not successfully enabled.
Detailed
Description The Dynamic Power Supply Engagement feature was not successfully enabled.
Recommended
Response Action Restart the Chassis Management Controller and retyr the operation. To restart the Chassis
Management Controller, using the WEB UI, go to Chassis Overview > Power > Control, select
the Reset CMC option, and then click Apply.
Category Audit
SubCategory PWR = Power Usage
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
PWR8506
Message Cumulative power computation (KWH) time is reset on arg1 .
Arguments
• arg1 = time
Detailed
Description Resetting the power computation reading causes the log to report time at which it is reset.
Recommended
Response Action No response action is required.
Category Audit
551