Dell PowerEdge VRTX - Manual (Page 245)

15
HWC Event Messages
HWC8502
Message The KVM interconnect is connected.
Detailed
Description The KVM cable is connected.
Recommended
Response Action No response action is required.
Category System Health
SubCategory HWC = Hardware Config
Severity Severity 3 (Informational)
Trap/EventID 2331
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#LC Log;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
HWC8501
Message The KVM interconnect is not connected or is improperly connected.
Detailed
Description The cable may be necessary for proper operation. System functionality may be degraded.
Recommended
Response Action Check presence, then re-install or reconnect.
Category System Health
SubCategory HWC = Hardware Config
Severity Severity 1 (Critical)
Trap/EventID 2329
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#LC Log;#Remote System Log
245