Dell PowerEdge VRTX - Manual (Page 312)

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
IOV1002
Message The operation was not successful.
Detailed
Description The operation did not complete successfully due to an exception from the instrumentation
layer.
Recommended
Response Action Retry the operation. If the issue persists, reset CMC and retry the operation when the CMC has
completed restarting. The CMC may take 2 to 3 minutes to complete restarting.
Category Configuration
SubCategory IOV = IO Virtualization
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
IOV1003
Message Missing required parameter arg1 .
Arguments
• arg1 = parameter name
Detailed
Description One or more parameters identified in the message required for the method are missing.
Recommended
Response Action Refer to the Dell Chassis PCI Management Profile document and provide the required
parameter.
Category Configuration
SubCategory IOV = IO Virtualization
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. None
312